|
|
| Model Name | Megoliath™ |
| Model Number | 44-10100-000 |
| Series | Goliath Series |
| Type | Bass Speaker Enclosure |
| Description | The Megoliath,
which can easily handle 1200 watts of power, represents the cutting
edge in bass speaker cabinet design. It was created for the player
who demands ultimate performance at high volume levels, as well as
the discriminating bassist who requires flexibility when utilizing
effects. Groundbreaking in design, the Megoliath was constructed
with two independent compartments that each house four 10 inch
custom SWR® speakers. This design enables the cabinet to be run in
either stereo or mono. In stereo mode a signal can be split into two
different sections of the cabinet for true stereo separation. In
mono, all 8 speakers work together to create a truly massive sound. Very much like the SWR Goliath III™, the upper section of the Megoliath is a 4x10 enclosure equipped with a standard SWR tweeter. The lower section has the same 4x10 speaker design but without the tweeter. Stereo signals are routed to the appropriate speaker section to obtain the optimum sound for the player's application. For example, distortion, which sounds best when used without a tweeter, can be run through the bottom half of the Megoliath. Effects such as reverb, chorus, and delay are sent to the top half of the Megoliath. This unique SWR feature allows the player to achieve optimum efficiency from effects while still retaining the "bottom end" of the true bass signal. Although it is large by nature, the Megoliath was designed by the engineering team at SWR to offer maximum portability. It comes equipped with several unique SWR features that make transportation simple. These features include Grab Bar handles on its top and heavy duty casters on its bottom, inset handles located on the bottom of the cabinet for lifting, and skids on the back for pushing it onto a stage or into a vehicle. |
| Features | Carpeted 8x10
speaker enclosure with tweeter. Tilt back design for easy transportation. Can be run as a single 4 ohm, 8x10 enclosure or as a dual, 8 ohm, 4x10 enclosure. Grab Bar Handles, Recessed Castors, Skid Rails, Kick Plate, Stacking Corners |
| Power Output | N/A |
| Impedance (Ohms) | Mono Cabinet
Mode: 4 Ohms Dual Cabinet Mode: 8 Ohms (each chamber) |
| Speakers | Four 10 inch custom SWR speakers, P/N 0067081000 |
| Channels | N/A |
| Controls | High Frequency Attenuator |
| Covering | Black Carpet with Chrome Stamped Steel Vibration-Free Grille |
| Weight | 145 lbs. |
| Dimensions | Height: 48.5"
Width: 26.5" Depth: 20.25" |
| Power Handling | Mono Cabinet
Mode: 1200 Watts Dual Cabinet Mode: 600 Watts (each chamber) |
| Tube Complement | N/A |
| Accessories | The Megoliath comes equipped with a custom-length 2 1/2' Speakon® -to-Speakon cable for mono operation. |
| Cover | Uses Cover P/N 0066182000, US MSRP $79.95 (Not Included) |
| Footswitch | N/A |
| Frequency Response | 100 dB SPL @ 1W1M (-3dB @ 37 Hz & 13 kHz) |
| SPL | 100 dB SPL @ 1W1M (-3dB @ 37 Hz & 13 kHz) |
| Suggested Speaker Enclosures | N/A |
| Suggested Speaker Combinations | N/A |
| Input Impedance | N/A |
| Output Impedance | N/A |
| Sensitivity | N/A |
| Signal to Noise Ratio | N/A |
| Introduced |